DT14 series｜Rubber Hybrid Safety Mats｜DADISICK
- model
- DT14 series
nieruchomość
- Detection method：
- Pressure sensing method
- Maximum allowable dynamic load：
- Impact load<200kg/cm²
- PVC anti slip surface layer：
- Anti slip grade R9
- Encapsulation and Surface Protection：
- Rubber Hybrid
- IEC 61508：PFHS
- 9.99*10 1/h(SIL3)
Ocena
Opis produktu
Model Specifications | |||
|
Safety pad size (L1×L2)
|
DT14 type |
||
NBR overall package anti-rolling type |
|||
Thickness 14mm |
|||
30cmx30cm | DT14-250X500 | ||
40cmx40cm | DT14-500*500 | ||
50cmx25cm | DT14-500*1000 | ||
50cmx40cm | DT14-750*1000 | ||
50cmx50cm | DT14-1000*1000 | ||
60cmx40cm | DT14-1100*1800 | ||
Note: 1. The safety carpet size is the net size without aluminum blanking, and the size error is +/-6mm 2. Accept non-standard size safety carpet customization. Non-standard size safety carpet side length should be <3000mm, area ≤1.5m² 3. Accept special-shaped safety carpet design and customization, the user needs to provide the protection area plan and technical requirements. The maximum area of special-shaped safety carpet is ≤3m² | |||
|
Technical Parameters
|
||
|
DT14 product introduction
|
||
|
Sensing safety carpet
|
DT14 |
|
|
Adaptive detection range
|
Detect the presence of operators and items |
|
|
Recommended use occasion
|
It is suitable for the safety protection of people and small cars in mixed areas |
|
Operating environment requirements | Suitable for indoor and outdoor use, the ambient temperature range -10℃ -+ 60℃ | |
Safety carpet thickness | 14 mm | |
Surface protection material | NBR rubber | |
Surface pattern and color | Copper coins, patterned non-slip surface (black, yellow, red) | |
Edging form | Aluminum banding | |
Applicable industry | Paper industry, electronics industry, automobile welding production line, forging production line, General industrial applications and automatic palletizers and other light and heavy industrial occasions | |
Ordering instructions | Safe carpet sizes available Provide safety area dimensions or drawings | |
|
System technical standard
|
||
|
dimension
|
Can be specially made on request Length 200mm-1000mm Width 200mm-2000mm |
|
|
Under pressure
|
Dynamic 500KG, solid 700KG |
|
|
Surface material
|
Rubber (red/yellow/black optional) |
|
|
Control level
|
Achieved level 3 in combination with controller |
|
Class of protection | IP65 | |
Ambient temperature | -10℃ to 60℃ | |
thickness | 14mm | |
Triggering force | Adult 30KG | |
Cable length | The options are 3M and 5M | |
Response time | Less than 30ms | |
weight | about30kg/sq.m | |
Chemical resistance | Less than 30ms | |
Material capacity | normal | |
Service life | A million times | |
waterproof | stronger | |
Mineral acid proof | normal | |
Organic acid protection | normal | |
Alcohol proof | normal | |
antiethanol | normal | |
anti-corrosion | normal | |
Oil-proof solvent | normal | |
Anti-bio-oil solvent | normal | |
Output type | NO(normally open) | |
Maximum voltage | DC24V | |
Selection of relays
Four thread Safety Mats circuit diagram
Attention: This product must not come into direct contact with the power supply and requires the auxiliary use of relays or controllers.The maximum voltage is DC24V.
Safety mats connection Ter-A series Safety relay wiring diagram
1. Non Isolated Safety Protection Of Single Safety Mat
2. Non isolated safety protection assembled by multiple safety mats
DOCUMENTS & DOWNLOADS
CATALOGUE