Ultrasonic Sensors CSDA Series | Double Sheet Detection Sensor | DADISICK
Ultrasonic Sensors CSDA Series | Double Sheet Detection Sensor | DADISICK
Ultrasonic Sensors CSDA Series | Double Sheet Detection Sensor | DADISICK
Ultrasonic Sensors CSDA Series | Double Sheet Detection Sensor | DADISICK
Ultrasonic Sensors CSDA Series | Double Sheet Detection Sensor | DADISICK
Ultrasonic Sensors CSDA Series | Double Sheet Detection Sensor | DADISICK
model
CSDA12 series | CSDA18 series | CSDA30 series

nieruchomość

Size:
Cylindrical M12 mm | M18 mm | M30 mm
Emitter - receiver spacing:
20-40 mm
Emitter - receiver spacing:
20-60 mm
Emitter - receiver spacing:
20-100 mm
Material:
Nickel plated copper, plastic fittings
Connection type:
2 m, PVP cable, 0.14 mm²
Ambient temperature:
-25°C~+70°C (248~343K)

Ocena

Opis produktu

CSDA single and double sheet detection series 3-way control output 3E1/3E2/3E3/3E4 
Model
CSDA12-40-J25-3E1
CSDA18-60-J55-3E1
CSDA30-100-J55-3E1
CSDA12-40-J25-3E2
CSDA18-60-J55-3E2
CSDA30-100-J55-3E2
CSDA12-40-J25-3E3
CSDA18-60-J55-3E3
CSDA30-100-J55-3E3
CSDA12-40-J25-3E4
CSDA18-60-J55-3E4
CSDA30-100-J55-3E4
Emitter - Receiver spacing
20-40 mm
20-60 mm
20-100 mm
Blind zone
5 mm in front
7 mm in front
7 mm in front
Maximum allowable angle deviation
±45° to the vertical plane
Scope of work
Paper and paper with a unit area weight of 20-60 g/m², alloy laminates and film swith a thickness of 0.2 mm, automatic adhesive films
< 1 mm thick metal composite board and film, self-adhesive sheets, labels on substrate materials > 0.01 mm paper, PCB board, silicon wafer
< 3 mm thick metal plate
Output type: 3E1/3E2
3 switching outputs NPN, NO/NC
Output type: 3E3/3E4
3 switching outputs PNP, NO/NC
Response delay
4 ms
10 ms
10 ms
Weight
200 g
220 g
480 g
Electrical data
Response delay
10 ms
Operating voltage
10-30 V DC, reverse polarity protection
LED green Iight
Tip: Single sheet detected
LED yellow Iight
Tip: No target (air)
LED red light
Tip: Double sheet detected
Overpower protection
200 mA , red light and green light flashing at the same time
Impedance
≥ 4 KΩ
Working current
3 x 200 mA short circuit protection / overload protection
No-load current
≤ 30 mA
Material
Copper nickel plating , plastic fittings , glass filled epoxy resin
Connection type
2 m, PVP cable, 0.14 mm²
Drop
≤ 2 V
Pulse width
≥ 100 ms
Protection Class
IP 67
Environmental parameters
Ambient temperature
-25°C~+70°C (248~343K)
Storage temperature
-40°C~+85°C (233~358K)
Dimensions  (unit: mm)

Dimensions of Ultrasonic sensors CSDA series
Electrical connection
Electrical connection diagram of Ultrasonic sensors CSDA series
Data sheet
CSDA series data sheet
Operation instructions
CSDA series operation instructions